Canon 188A User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
in normal AE photography, it is advis
able to check that the pilot lamp is glow
ing before shooting.
Confirmation of auto-exposure flash is
not possible when the 188A is used
with any A-series camera other than
the AE-1 PROGRAM, and it is only
possible in the full autoflash mode.
The auto-exposure confirmation signal
tells you whether you are close enough
to your subject but not whether you
are far enough away. If you think you
may be too close to your subject, check
the lens' distance scale and the auto
shooting distance range on the flash