Exposure meter needle and exposure – Canon SCOOPIC 16M User Manual

Page 59

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Exposure Meter Needle

and Exposure

The automatic exposure system of the Scoopic 16M is

activated when the shutter release button is depressed

approximately half way. The lens will then "stop-down"

to the correct shooting aperture and this aperture will

be indicated by the needle in the T/stop scale.

AUTO Shooting

When the aperture setting needle is within the proper

exposure range, press the shutter button all the way.

The film will be fed and will be ready for shooting.

The needle within the right-hand red mark means

over-exposure. Attach an ND filter to reduce the light

intensity.