Single frame shooting – Canon 512XL User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
5
To stop remote control shooting, always switch
over to "R" or to "OFF" before removing the
Remote Switch.
• Extension Cord E1000 (10m) may be linked one after
another when Remote Switch is used.
Single Frame Shooting
Single frame EE shooting is possible for animation and
other purposes such as recording separate stages of
movement at spaced intervals.
1
Set frame speed dial to "18".
2
First, set the shutter switch to "RL", pull the
shutter lever slightly to see the f/stop values inside
the viewfinder, and then set the shutter switch to Q].
3
Insert
the
Remote
Switch
into
remote
control
socket.
• Place accessory cap on the eyepiece to prevent the
light entering from behind.
4
Pull the shutter lever,.until it locks to a position.
5
Every
time
the
button
on
the
head
of
the
Remote Switch is pressed, a single frame is ex
posed.
Note: During single-frame-shooting, a lamp which lights
the exposure indicator inside the view finder to
show the aperture opening numeral/s goes off. If
you wish to see the f/stop values, set the shutter
switch to "RL" and pull the shutter lever slightly.