Removing the film – Canon 130U User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

Loading the Film

»A film speed of ISO 400 is recommended.
• The film speed is set to ISO 25 when non-DX

film is loaded. If the film does not have a DX-
code, insert it into the film compartment, close
the back cover and press the shutter button

once or twice.

• For slide (reversal) film, you can use DX-

coded film speeds of ISO 25, 50, 100, 200,

400. 800. 1600 and 3200.

Removing the Film

' ^

The film rewinds

automatically when it

reaches the end

When S blinks, open the
back cover and remove the

film.

* •

Rewinding the Fiim in Mid-roii

• Use the strap buckle pin on

the strap buckle to press

the ^0 button on the

bottom of the camera.

• Hold the button down until

the film starts to rewind.

H-12