Canon 300 TL User Manual

Page 34

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

0) Center the main subject in the spot metering mark

and press the spot metering button.

• The aperture is set automatically.
•

Next, a pre-flash is emitted from the main flash

head and the correct flash output value is stored

into memory for 30 seconds.

9) Make sure the fixed dot (l) is aligned with the

triangle index on the right of the viewfinder.

• When the fixed dot is aligned with the triangle in

dex, the exposure is correct for the main sub

ject.

If not aligned with the triangle index, the subject

is out of shooting distance range. Move closer to

the subject and press the spot metering button

again.