Setting of the cca filter switch, Loading of film cartridge, Footage counter – Canon AUTO ZOOM 1218 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting of the CCA Filter Switch
Under normal daylight conditions, set the CCA filter switch so that
the "sun" mark can be seen.
4 Refer to page 19 for shooting with artificial light.
Loading of Film Cartridge
1
Open the side cover by sliding the side cover latch in the direc-
'
tion of the arrow.
O
Slide the Super 8 film cartridge in towards the front of the
^ camera with the label side facing upwards. Then set it into
position by lightly pressing down on it. The film speed is auto
matically set with the insertion of the cartridge.
Close the side cover by pressing it.
3
k
Set the shutter lock dial at " R ". Pull the trigger or press the
' shutter release button for confirming the film advance. If you
can hear the sound of film winding and the white dot in the film
transport
indicator
revolves,
it
means
the
cartridge
is
properly
inserted.
4
The Super 8 film cartridge is loaded with 50-foot length film.
There is no need for flipping over the cartridge in reverse direction
halfway through the film.
Footage Counter
The footage counter tells you how many feet of film you have
exposed.
It
automatically
resets
to
"0"
when
the
cartridge
is
taken out.