Nikon N4004s User Manual

Page 66

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

When mountable non-AF Nikkor lenses are used:

* Exposure Indicator LEDs do not appear. Use external exposure

meter, then set the exposure using lens aperture ring and
shutter speed dial. Ignore the aperture set on camera’s
aperture dial.

* If the shutter speed dial is set to L or A, or the aperture dial is

set to S, the shutter locks.

* TTL auto flash is possible with built-in TTL flash or accessory

Nikon Speedlighfs SB-24, SB-23, SB-22, SB-20, SB-15, SB-16B.

(Programmed TTL auto flash is not possible.) To use flash or
speedlight, set shutter speed dial to 1/60 sec. or slower, then
set the aperture using the lens aperture ring. For speedlight
settings and shooting distance range, see speedlight Instruc

tion manual. Except for flash recommendation, ready-light func
tions as normal. Fill-flash cannot be controlled automatically.

* When using the N4004s with an Al-P Nikkor lens, automatic

exposure control is available but automatic focusing is not.