Nikon EL2 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
been loaded properly and is being advanced. Then, fold
the crank flat for film storage.
After advancing the film two frames to dispose of any
exposed film, the frame counter at the upper right of
the camera will indicate “0”; now advance the film one
more frame to prepare the camera for taking the first
exposure.
Note; Setting the shutter-speed dial to one of the fixed-speed
positions (rather than to “A”) prior to making blank exposures
will provide for the most rapid loading as this action will pre
vent the camera from selecting a slow speed, as might be the
case should loading be performed with the lens cap in place.
However, be sure to reset the dial to "A” if automatic operation
is to be performed.
11