Nikon EL2 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Checking the Battery
The EL2 is provided with a special circuit that enables
the photographer to check the battery power condition
without causing excessive battery drain which might
occur by having to turn the camera on. To check bat
tery power, simply depress the power check button
and watch the power check lamp for indication of the
power level. If the check lamp glows, battery power is
sufficient. If the lamp fails to glow, battery positioning
should be checked; then, if the lamp still fails to glow,
replace the battery.
Note: When checking battery power, hold the button depressed
only long enough for the check lamp to glow; prolonged de
pressing only serves to drain battery power.