Nikon n2000 User Manual

Page 38

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

PROGRAMMED TTL AUTO FLASH PHOTOGRAPHY IN P AND P HI MODES

Viewfinder indication

Flash sync speed

shutter operates
at 1i125 sec.

In programmed TTL auto flash photography, the camera selects the appropriate aper

ture. Note that only Al-S type lenses can be used.

Set the N2000 to P or P HI, and set lens to minimum aperture (largest (-number).

Set the flash unit’s mode selector to TTL, and turn the flash unit on. Look inside the
viewfinder and lightly press the shutter release button. With the ready-light on, as long
as you have none of the following warning indications, you can shoot.

Warning indication
If triangle-shaped top and bottom LEDs

blink, check your lens type (must be an
Al-S type), or reset lens to minimum
aperture.