Load the batteries, Install the battery clip, 0^ close the battery chamber – Nikon SB 11 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Load the batteries.

Insert eight AA-type penlight

batteries following the + and -

symbols on the inside of the battery

clip.

Install the battery clip.

Insert the battery clip into the

battery chamber. Make sure the ter

minal end goes in first. Then line up

the V-shaped notch on the end of the

clip with the white dot on the rim of

the battery chamber. Push the clip

until it drops into the fully seated

position.

0^ Close the battery

chamber.

Screw the battery lid back into place.