beautypg.com

Important, Safe operation practices – Craftsman 247.799620 User Manual

Page 2

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

IMPORTANT

SAFE OPERATION PRACTICES

THIS SYMBOL POINTS OUT IMPORTANT SAFETY INSTRUCTIONS WHICH, IF NOT FOLLOWED, COULD ENDANGER THE PERSONAL
SAFETY AND/OR PROPERTY OF YOURSELF AND OTHERS. READ AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL BEFORE
ATTEMPTING TO OPERATE YOUR POWER CHIPPER-MCUUM. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN

PERSONAL INJURY. WHEN YOU SEE THIS SYMBOL- - ^

HEED ITS WARNING.

A

A

Your chipper-vacuum vas built to be operated according to the rules for safe operation in
this manual. As with a ny type of power equipment, carelessness or error on the part of the

DANGER:

operator can result in serious injury. This unit is capable of amputating fingers and hands
and throwing objects. Failure to observe the following safety instructions could result in

serious injury or death.

I. GENERAL OPERATION

Read this owner’s guide carefully in its entirety befo e attempt­
ing to assemble this machine. Read, understand, an j follow all
instructions on the machine and in the manuai(s) be’ore opera­

tion. Be completely familiar with the controls and the proper use
of the machine before operating it. Keep this manu il in a safe

place for future and regular reference and for order! ig replace­
ment parts.

Your chipper-vacuum is a powerful tool, not a plaything.

Therefore, exercise extreme caution at all times. Ycjr unit has

been designed to perform two jobs; to chip and vacu jm vegeta­

tion found in a normal yard. Do not use it for any oth ir purpose.

Never allow children under 16 to operate the unit, '¡hildren 16

years and older should only operate under close part ntal super­
vision. Only responsible individuals who are familial with these

rules of safe operation should be allowed to use your jnit.

Keep the area of operation clear of all persons, partic ilarly small

children and pets. Stop the engine when they are in the vicinity
of the unit.

When feeding material into this equipment, be extremely careful

that pieces of metal, rocks, bottles, cans or other fort ign objects
are not included. Personal injury or damage to tl e machine
could result.

Always wear safety glasses or safety goggles, durin ] operation

and while performing an adjustment or repair, to protect eyes
from foreign objects that may be thrown from the ma :hine.

Wear sturdy, rough-soled work shoes and close fi ting slacks

and shirt. Shirt and slacks that cover the arms ard legs and
steel-toed shoes are recommended. Do not wear I )ose fitting
clothes or jewelry, and secure hair above shoulder length. They

can be caught in moving parts. Never operate a unit n bare feet,
sandals or sneakers. Wear gloves when feeding ma:erial in the
chipper chute.

Do not operate the unit while under the influence o alcohol or

drugs.

• Do not over-reach. Keep proper footing and balance it all times.

• Never place your hands or any part of your body or c othing near

or under rotating parts. Keep clear of the discharge opening at
all times Never insert your hands or any part of ynur body or
clothing into the nozzle, chipper chute or discharge opening as
the rotating impeller can cause serious injury.

take or dis-
ne machine

ur body or

:t the spark
n the spark

If it is necessary for any reason to unclog the feed ir

charge openings or to inspect or repair any part of 1
where a moving part can come in contact with yc
clothing, stop the machine, allow it to cool, disconne
plug wire from the spark plug and move it away fro
plug before attempting to unclog, inspect or repair.

Never operate unit without vacuum bag and disci
properly affixed to unit. Large zippered end of b
closed to prevent objects from being blown out.

arge chute

ig must be

Never operate unit without either the inlet nozzle or optional

hose attachment properly affixed to unit. These devices shield

the operator from accidental contact with the rotating impeller.

Never attempt to convert the unit from nozzle to hose mode or

vice versa with the engine running.

Never attempt to remove or empty vacuum bag when engine is

running. Shut the engine off and wait for the impeller to come to
a complete stop before removing the bag. The impeller contin­
ues to rotate for a few seconds after the engine is shut off.
Never place any part of the body in the impeller area until you
are sure the impeller has stopped rotating.

Keep all guards and safety devices in place and operating prop­

erly.

Do not allow an accumulation of processed material to build up

in the discharge area as this will prevent proper discharge and
can result in kick-back from the chipper chute.

Keep your face and body back from chipper chute to avoid acci­

dental bounce back of any material.

If the cutting mechanism strikes a foreign object or if your

machine should start making an unusual noise or vibration,
immediately stop the engine, disconnect the spark plug wire and
move the wire away from the spark plug. Allow the machine to
stop and take the following steps.

• Inspect for damage

• Repair or replace any damaged parts.

• Check for any loose parts and tighten to assure continued

safe operation.

Muffler and engine become hot and can cause a burn. Do not

touch.

Do not allow leaves or other debris to build up on engine’s muf­

fler. The debris could ignite and cause a fire.

Do not operate engine if air cleaner or cover over carburetor air-

intake is removed, except for adjustment. Removal of such
parts could create a fire hazard.

Jl. CHILDREN

Tragic accidents can occur if the operator is not alert to the pres­
ence of small children. Children are often attracted to the chipping
and vacuuming activity. Never assume that children will remain
where you last saw them.

Keep children out of the work area and under the watchful eye of

a responsible adult other than the operator.

• Be alert and turn the unit off if a child enters the area.

Never allow children under the age of 16 to operate the chipper-

vacuum.

III. SERVICE

Use extreme care in handling gasoline and other fuels. They are
extremely flammable and the vapors are explosive.

Store fuel and oil in approved containers, away from heat
and open flame, and out of the reach of children.