Craftsman 917.28948 - Manual (Page 9)

TO INSTALL MOWER
1. Set parking brake lever and lower
attachment lift lever
• Depress clutch/brake pedal all the way
down and hold.
• Pull parking brake lever up and hold,
release pressure from clutch/brake pedal,
then release parking brake lever. Pedal
should remain in brake position. Ensure
parking brake will hold tractor secure.
2. Assemble front gauge wheel (W) to
front of mower.
4^CAUTION: Lift lever is spring loaded.
Have a tight grip on lift lever, lower it slowly
and engage in lowest position. Lift lever is
located on left side of fender.
W. Front Gauge Wheel Y. PA O.D. Washer
Z. 3/8-16 Locknut
3. Turn steering wheel left and position
mower.
• Turn steering wheel to the left as far as it
wili go and position mower on right side of
tractor with deflector shield (Q) to the right.
A. Mower Side Suspension Arms
B. Retainer Spring
C. Rear Lift Link(s)
D. Right Side Rear Mower Bracket
E. Front Lift Link Assembly
F. Front Suspension Bracket
H. Front Mower Bracket
I. Left Side Rear Mower Bracket
K. Beit Tension Rod
L. Locking Bracket
M„ Engine Clutch Pulley
Q. Deflector Shield
S. Anti-Sway Bar
W. Front Gauge Wheel