Cabletron Systems 6H129-08 - Manual (Page 121)

Flash Download Screen
6H128-08 and 6H129-08 User’s Guide 5-75
To access the Flash Download screen from the Module Specific
Configuration screen, use the arrow keys to highlight the FLASH
DOWNLOAD menu item and press ENTER. The Flash Download screen
displays.
Figure 5-28 Flash Download Screen
The following briefly explains each field of the Flash Download screen:
Download Method (Selectable)
This field steps between TFTP, RUNTIME and BOOTP. If set for
BOOTP, the module sends out a BootP request to determine the IP
address of the TFTP server and the filename of the image to be
downloaded. If set for TFTP or RUNTIME, the 6H12X-08 attempts a
TFTP download based on the IP address and filename entered in the fields
at the bottom of the Flash Download screen.
Section 5.22.1 describes how
to download using TFTP. Section 5.22.2 describes how to download using
RUNTIME. Section 5.22.3 describes how to download using BootP.
NOTE
Download Server IP and Download File Name are displayed
only when TFTP or RUNTIME are selected in Download
Method.
Firmware Revision: XX.XX.XX
Flash Download
Download Method:
Reboot After Download:
TFTP Gateway IP Addr:
Last Image Server IP:
Last Image File Name:
Download Server IP:
Download File Name:
2159-24
BOOTPROM Revision: XX.XX.XX
[TFTP]
[YES]
0.0.0.0
XXX.XXX.XXX.XXX
/tftpboot/6H128.hex
XXX.XXX.XXX.XXX
/tftpboot/6H128.hex
Module Type: 6H128-08
Slot Number: X
EXIT
6H128-08 LOCAL MANAGEMENT
TFTP DOWNLOAD. WILL COMMIT TO FLASH. REBOOT IN PROGRESS...
EXECUTE RETURN