Cabletron Systems 6H129-08 - Manual (Page 119)

System Resources Screen
6H128-08 and 6H129-08 User’s Guide 5-73
Figure 5-27 System Resources Screen
The following briefly explains each field of the System Resources screen.
CPU Type (Read-only)
Indicates the microprocessor used in the 6H12X-08.
Flash Memory Installed (Read-only)
Indicates the amount of FLASH memory installed in the 6H12X-08 and
how much is currently available.
DRAM Installed (Read-only)
Indicates the amount of DRAM installed in the 6H12X-08 and how much
of it is currently available.
NVRAM Installed (Read-only)
Indicates the amount of NVRAM installed in the 6H12X-08 and how
much of it is currently available.
Current Switch Utilization (Read-only)
Shows how much (percentage of capacity) the 6H12X-08 is currently
being used.
Firmware Revision: XX.XX.XX
System Resources
2159-40
BOOTPROM Revision: XX.XX.XX
Flash Memory Installed : X MB
DRAM Installed: XX MB
NVRAM Installed: XX KB
Available: XXXXX Bytes
CPU Type: i960 HT 25Mhz
Current Switch Utilization: 66%
Peak Switch Utilization: 75%
Reset Peak Switch Utilization: [NO]
Module Type: 6H128-08
Slot Number: X
EXIT
Available: XXXXX Bytes
Available: XXXXX Bytes
6H128-08 LOCAL MANAGEMENT
Event Message Line
SAVE
RETURN
RETURN