Cabletron Systems 6H129-08 - Manual (Page 103)

SNMP Community Names Screen
6H128-08 and 6H129-08 User’s Guide 5-57
To access the SNMP Community Names screen from the Module
Configuration Menu screen, use the arrow keys to highlight the SNMP
COMMUNITY NAMES menu item and press ENTER. The SNMP
Community Names screen,
Figure 5-22 , displays.
Figure 5-22 SNMP Community Names Screen
NOTE
If the 6C105 has been assigned community names, it is not
necessary to assign community names to the individual
modules installed in the chassis unless the user wishes to limit
access to 6C105 chassis screens by assigning different
community names to each module. When community names
are assigned to individual modules, access is limited to the
screens specific to the module to which the terminal is attached
and the Local Management session will begin at the Module
Menu screen. See
Section 5.12 .
Super-user access gives the user full management privileges,
allows existing passwords to be changed, and allows all
modifiable MIB objects for the Cabletron Container MIB and
Internet MIB-II to be accessed.
Firmware Revision: XX.XX.XX
SNMP Community Names
2159-17
BOOTPROM Revision: XX.XX.XX
Access Policy
read-only
read-write
super-user
Module Type: 6H128-08
Slot Number: X
6H128-08 LOCAL MANAGEMENT
Event Message Line
RETURN SAVE
Community Name
public
public
public
EXIT