Operation, Edging tips – Craftsman 536.772301 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

OPERATION
EDGING TIPS
• Edging is best performed when conditions
are dry. If the soil is to wet, dirt becomes
packed around the biade causing prema
ture belt wear and decreased perfor
mance.
• if dirt does become packed around the
blade, stop the engine and remove the
wire from the spark piug. Remove the
packed dirt and debris from the biade.
• For deep edging, first cut at shaiiow
depths. Then, cut at greater depths untii
the desired depth is obtained.
• For uniform edging, make sure the blade
guide rides on the surface.
• Edging can be customized by varying the
number of passes and by the distance the
blade is from the surface.
A
WARNING: Read the Owner’s
manual. Know location and
functions of all controls. Keep
all safety devices and shields in place.
Never allow children or uninstructed
adults to operate Edger. Shut off engine
before unclogging blade or making re
pairs. Keep bystanders away from ma
chine. Keep away from the blade all ro
tating parts, which cause injury.
F-001102M
15