Operation – Craftsman 536.772301 User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

OPERATION

HOW TO USE THE INDEX LEVER

1. stop the engine and disconnect the

spark plug wire from the spark plug.

2. Loosen the

front wheel knob

shown in

Figure 10. Slide the

front wheel

all the

way to the right side.

3. Securely tighten the

front wheel knob.

NOTE; To prevent the blade from hit

ting the wheel while trimming, make

sure the front wheel is set in the ex

treme right position.

4. Disengage the

index lever

(see

Figure 11). Move the

index lever

to the

notch marked 90°.

Figure 10

5. Reconnect the spark plug wire to the

spark plug.

6. Start the engine.

7. Move the clutch lever to the desired trim

ming height.

WARNING; While the engine is

running, never leave the Edger.

Before you adjust the wheels or

change the blade position, always dis
engage the cutting blade and stop the
engine.

Figure 11

F-001102M