Ring maintenance – Craftsman 580.761800 User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

0-RING MAINTENANCE

Through the normal operation of your pressure washer,
0-Rings, which keep the connections of the hoses and

gun tight and leak-free may become worn or damaged.

Provided with your pressure washer is an 0-Ring
Maintenance Kit which provides replacement 0-Rings,
Rubber Washer and Quick Connect filter.

Parts in the 0-Ring Kit Include:

• 1 0-Ring (p/£97837) for the end of the spray gun

connection between gun and high/low spray wand.

1 O-Ring (p/n B2386) for the outside of the Male

Quick-Connect.

2 0-Rings (p/n B2264) for the ends of the high pres

sure hose.

1 Water Inlet Screen (p/n B2384) for the Female

Quick-Connect.

To remove a worn or damaged O-Ring:

• Use a small flathead screwdriver to get underneath

the O-Ring and pry it off.

Note: The above two 0-Rings are close in size. Please
match carefully to assure proper O-Ring usage.

• 1 Rubber Washer (p/n B2385) for the inside of the

Male Quick-Connect.