Canon imageRUNNER C5870U - Manual (Page 3)

Punch Waste Tray Capacity: Approximately 3,000 Sheets
Punch Waste Tray Access: Front
Power Source: From Finisher-R1 or
Saddle Finisher-R2
Dimensions (H x W x D): 32-3/4" x 4-1/4" x 24-1/4"
( 833 mm x 107 mm x 615 mm)
Weight: Approximately 15.9 lb. (7.2kg)
Side Paper Deck-U1
Number of Drawers: 1
Paper Capacity: 3,500 Sheets (20 lb. Bond)
Paper Size: Letter
Paper Weight: 17 lb. Bond to 110 lb. Index
Power Source: From Main Unit
Dimensions (H x W x D): 22-3/8" x 12-7/8" x 23"
(569.5
mm x 326 mm x 583 mm)
Weight: Approximately 101 lb. (46kg)
Color UFR II/PCL/PS Printer Kit-LI
Processor: Canon Custom Processor—Shared
RAM: 1GB (Std./Max.)—Shared
Hard Disk: 80GB—Shared
PDL Support: PCL 5c, PostScript ® 3 TM
Emulation, UFR II
Interface Connections: 10/100Base-T (RJ-45), USB 2.0
Network OS: Windows ® 98/Me/2000/XP
Windows NT ® 4.0/Server 2003
Solaris TM 1.1x, 2.5x, or later,
Mac OS 9.1 or later (PPD),
Mac OS X (10.1.5 or later),
Novell NetWare v.3.2, 4.1, 4.11,
4.2, 5, 5.1, 6, 6.5 (IPX/SPX
TM )
Print Service
NetWare: NDS Pserver, Bindery Pserver,
Nprinter, Rprinter
TCP/IP: LPD/LPR, RAW (Port 9100),
IPP 1.1, SMB, FTP
AppleTalk: PAP (PostScript)
Printer Drivers
UFR II: Windows 2000/XP
Windows Server 2003
Citrix MetaFrame
Macintosh OS X (10.1.5 or later)
PCL 5c: Windows 98/Me/2000/XP
Windows NT 4.0/Server 2003
Citrix MetaFrame
PS 3 Emulation: Windows 98/Me/2000/XP
Windows NT 4.0/Server 2003
Citrix MetaFrame
Macintosh OS X (10.2 or later)
imagePASS-G1
Type: External Piggy-Back Controller
Processor: Intel ® Celeron ® M 1.2GHz
RAM: 256MB (Std.), 512MB (Max.)
Hard Disk: 80GB
PDL Support: Adobe PostScript 3, PCL 5c
Interface Connections: 10/100/1000Base-T (RJ-45)
Internal Fonts
PS: 136 Fonts (117 Adobe ® Type
and 19 TrueType ® )
PCL 5c: 113 Roman
Protocol Stacks: Ethernet
IPX/SPX: 802.2, 802.3, Ethernet II,
Ethernet SNAP
TCP/IP: Ethernet II
AppleTalk: Ethernet SNAP
Network OS: Novell NetWare v.5.x or later
5.1/6.0 (IPX/SPX)
Windows 98/Me/2000/XP/ Server
2003 (TCP/IP), Solaris 2.5.1 or
later, MacOS 9.2 or
later, Mac OSX 10.2.4 or later
Dimensions (H x W x D): 13" x 11-1/4" x 3-1/2"
332mm x 287mm x 90mm
Weight: 10.9 lb. (5kg)
Power Requirements: 100 to 240V, 50/60Hz, 2A
Power Consumption: 35W
Additional Functions: Color Network ScanGear
Fiery ® Tools: WebTools TM , Command
WorkStation ® , Fiery Downloader TM ,
Fiery Remote Scan, ColorWise ® Pro
Tools (Calibrator, Color Editor,
Profile Manager, Color Setup,
Spot-On
® )
Optional: EFI Densitometer ED-100, Impose,
Secure Erase
Super G3 Fax Board-U1
Applicable Line: Public Switched Telephone
Network (PSTN)
Connection Lines: One
Sending/Original Size: Statement to 11" x 17"
(from Document Feed)
Recording/Printing Size: Statement to 11" x 17"
Other Optional Accessories and Utilities
• Accessibility Handle-A1
• Barcode Printing Kit-A1
• Braille Label Kit-A1
• Card Reader-C1
• Card Reader Attachment-C1
• Card Sets
• Cassette-AA1
• Copy Tray-K1
• Document Tray-K1
• eCopy Suite
• imageRUNNER Security Kit-A2 ▲▲
• imageWARE TM Suite
• Key Switch Unit-A2
• NetSpot Suite
• Stamp Unit-A1
• PDF High Compression Kit-A1
• Remote Operator’s Software Kit-A1
• Security Expansion Board-E1
• Universal Send PDF Enhancement Kit-C1**
• Voice Guidance Kit-A2
• Web Access Software Kit-D1 ▲▲▲
* During printing, the engine may occasionally pause
for internal adjustment.
** Requires PDF High Compression Kit-A1.
*** Requires Universal Send PDF Enhancement Kit-C1.
† 70 ipm @ 300 x 300 dpi available only for Send and
Scan modes.
†† Available on Saddle Finisher-R2 only.
††† Use of Additional Finisher Tray-A1 will alter top tray capacity
when outputting Letter/Statement-R/Executive documents.
▲ Puncher Unit-M1 can only be installed with either the
Finisher-R1 or Saddle Finisher-R2.
▲▲ Requires Security Expansion Board-E1.
▲▲▲ Requires Color UFR II/PCL/PS Printer Kit-L1 if printing PDF files.
Additional Finisher Tray-A1
Saddle Finisher-R2 Finisher-R1 Puncher Unit-M1
Copy Tray-K1
Main Unit Side Paper Deck-U1