Service and adjustment – Craftsman 536.886260 User Manual

Page 27

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SERVICE AND ADJUSTMENT

2. Be sure spark plug is clean and

free of foreign material. Check elec
trodes gap with a wire feeler gauge
and reset gap to 0.030” if neces

sary. See Figure 34.

To Replace;

1. If you need a new spark plug, use

only fhe proper replacement spark

plug.

2. Set the gap to 0.030 inches.

3. Before installing the spark plug,

lightly coat the spark plug threads

with oil or grease to insure easy re

moval.

4. Firmly tighten the spark plug in the

engine.

5. If a torque wrench is available,

torque the plug to 18 to 23 foot

pounds.

Feeler Gauge

F-001088J