Craftsman 536.886260 - Manual (Page 17)

MAINTENANCE
CUSTOMER RESPONSIBILITIES
SERVICE RECO RDS
Fill in dates as you
com plete regular
service.
Before
Each
Use O ften
Every
5
H ours
Every
10
H ours
Every
25
H ours
Each
Season
Before
Storage
SERVICE
DATES
Check Engine Oil Level
V V V
Change Engine Oil
V V
Tighten All Screws and
Nuts V V
Check Spark Plug
V V
Lubricate All Pivot
Points V V
Lubricate Disc Drive
Plate Zerk
(See Maintenance)
V
Check Fuel
V
Drain Fuel
V
Check Cable
Adjustment
(See Cable Adjustment)
V
Adjust Drive Belt
V V V
GENERAL RECOMMENDATIONS
The warranty on this snow thrower
does not cover items that have been
subjected to operator abuse or negli­
gence. To receive full value from the
warranty, the operator must maintain
the snow thrower as instructed in this
manual.
Some adjustments will need to be
made periodically to properly maintain
your snow thrower.
All adjustments in the Service and Ad­
justments section of this manual
should be checked at least once each
season.
AFTER EACH USE
• Check for any loose or damaged
parts.
• Tighten any loose fasteners.
• Check and maintain the auger.
• Check controls to make sure they
are functioning properly.
F-001088J
• If any parts are worn or damaged,
replace immediately.
LUBRICATION CHART
Lubricate
Disc Drive
Plate Zerk
With a Hi
Temp EP
Moly
Grease.
Figure 15
17