Cabletron Systems Expansion module 9T122-08 - Manual (Page 5)

3
9T122-08 Module Specific Information
General Configuration Screen
The General ConÞguration Screen (Figure 1), displays various information about
the selected module and allows you to set the following general parameters:
¥ Date and Time
¥ Screen Update Time
¥ Screen Lockout Time
¥ Host IP Address
¥ Subnet Mask
¥ Default Gateway
¥ Default Interface
¥ TFTP Gateway IP Address
Figure 1. General Configuration Screen
SmartSwitch 9000 LOCAL MANAGEMENT
General Configuration
Module Name: 9T122-08 Firmware Revision: 01.08.07
Slot Number: 2 BOOTPROM Revision: 01.01.09
Module Serial #: 04 Module Date: 05/24/1996
Module Board Revision: 04 Module Time: 09:18:13
Screen Refresh Time: 03 sec
Screen Lockout Time: 15 min
FLASH Memory: 2 MB
Host IP Address: XXX.XXX.XXX.XXX
Subnet Mask: 255.255.0.0
Default Gateway: NONE DEFINED
Default Interface: NONE DEFINED
Base MAC Address: 00-00-1D-01-03-04
TFTP Gateway IP: 0.0.0.0
SAVE RETURN