Cabletron Systems Expansion module 9T122-08 - Manual (Page 20)

9T122-08 Module Specific Information
18
Configuring (Administratively) an Individual Port
To administratively conÞgure an individual port:
1. Use the arrow keys to highlight the value in the Þeld of the port that you want
to conÞgure. Press the Space Bar until the desired value appears in the Þeld
(either ON or OFF).
2. Press the Return key.
Configuring (Administratively) All Ports
To administratively conÞgure all ports on the module, Token Ring 1 or Token
Ring 2:
1. Use the arrow keys to highlight the value in the enable/disable command
(lower left portion of the screen). Press the Space Bar until the desired value
appears in the Þeld (ENABLE ALL or DISABLE ALL, ENABLE TOKEN RING
1 or DISABLE TOKEN RING 1, ENABLE TOKEN RING 2 or DISABLE
TOKEN RING 2).
2. Press the Return key.
Exiting the Token Ring Port Configuration Screen
To exit the Token Ring Port ConÞguration Screen, use the arrow keys to highlight
RETURN
, then press the Return key.