Sony MZ-R50 - Manual (Page 33)

Error message
NO COI’Y
NO DISC
NO SIGNAL
,P/BONLY
PROTECTED
SORRY
TEMP OVER
TR FULL
TrPROTECT
Meaning/Remedy
• ^ ou triod lo iiiiikc ii cops from disc lh.it is protected bv the
Serial Copv Management System. You cannot make copies
from a digitally connected source which was itself recorded
using digital connection.
Use analog connection instead (page 6).
• You tried to play or record with no disc in the recorder.
Insert an MD.
• The recorder could not detect digital input signals.
♦ Make sure that the source is connected firmly (page 11).
• You tried to record or edit on a premastered MD (P/B means
playback.)
♦ Insert a recordable MD.
> You tried to record or edit on a MD with the tab in the record-
protect position.
Slide the tab back (page 28).
> You tried to erase a track mark while playing the MD or at the
beginning of the first track.
• You tried to erase a track mark to combine tracks the recorder
cannot combine (caused by system limitation).
• Heat has built up in the recorder.
Let the recorder cool down.
• There is no more space for new data w'hcn you are editing the
MD.
♦ Erase unnecessary tracks (page 21).
•
• You tried to record or edit on a track that is protected from
erasing.
♦ Record or edit on other tracks.