Sony MHC-RX33 - Manual (Page 30)

Specifications
AUDIO POWER SPECIFICATIONS:
(U.S.A. model only)
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 6 ohm loads both channels driven, from
70-20,000 Hz; rated 25 watts per channel
minimum RMS power, with no more than
O.OTo total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
North American model
Continuous RMvS pow er output
35 watts + 35 w'atts
(6 ohms at 1 kHz,
10% THD)
European model
DIN power output (Rated)
30 watts + 30 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS pow-er output (Reference)
35 W'atts + 35 W'atts
(6 ohms at 1 kHz,
10% THD)
Music power output (Reference)
60 watts + 60 watts
(6 ohms at 1 kHz,
10% THD)
Other models
The following measured at AC 110, 220 V 60 Hz;
DIN power output (Rated)
25 watts + 25 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
30 watts + 30 watts
(6 ohms at 1 kHz,
10% THD)
The following measured at AC 120, 240 V 60 Hz;
DIN power output (Rated)
30 watts + 30 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
35 watts + 35 watts
(6 ohms at 1 kHz,
10% THD)
Peak music power output (Reference)
400 watts
Outputs
PHONES (stereo phone jack);
accepts headphones of
8 ohms or more
SPEAKER; accepts impedance of 6 to
16 ohms
CD player section
S\stoiii
l.asor output
Frequency response
W<7\elength
Tape deck section
Rea>rding s\ stem
Frequency response
Wow and flutter
Compact disc and digital
audio sN’stem
St'inicondiK tor laser
(>. ^ 780 nm)
Emission duration:
continuous
Max. 44.6
This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
20 Hz-20 kHz (±0.5 dB)
780 - 790 nm
4-track 2-cliannel stereo
60-13,000 Hz (±3dB),
using Sonv I’YPE 1
cassette
±0.15% W.Peak (lEC)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)
30