Resetting the date and time – Sony DCR-TRV103 User Manual
Page 58
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Resetting the date and time
The clock is set to East Coast Standard Time at the factory.
The date and time are held in memory by the lithium battery. If you replace the lithium
battery with the battery pack or other power source connected, you need not reset the
date and time.
You must reset the date and time when the lithium battery becomes dead with no
power source installed.
First, set the year, then the month, the day, the hour and then the minute.
(
1
)
While the camcorder is in the standby mode, press MENU to display the
MENU settings.
(2) Turn the SEL/PUSH EXEC dial to select ©, then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select CLOCK SET, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to adjust the desired year, then press the dial.
(5) Set the month, day and hour by turning the SEL/PUSH EXEC dial and
pressing the dial.
(
6
)
Set the minute by turning the SEL/PUSH EXEC dial and pressing the dial by
the time signal. The clock starts to move.
(7) Press MEI^ to make the MENU settings disappear. The time indicator
appears.
SETUP MENU
CLOCK SET
AUTO TV ON
TV INPUT
ITR SIZE
C€UO MODE
ta TV INPUT
S LTR SIZE
(TC DEMO MODE
9 PRETURN
s. TV INPUT
g LTR SIZE
ITC DEMO MODE
9 PRETURN
TV INPUT 1999 JUL 4
^ LTR SIZE
* *
*
*
m DEMO MODE
P PRETUHN
♦ 1
5 EE PM
|MENU| :EN0
JUL 4 1999
TV INPUT
© ITH SIZE
nc DEMO MODE
P PRETURN
The year changes as follows;
1998
L_
1999
2029
58
Note on the time indicator
The internal clock of your camcorder operates on a 12-hour cycle.
• 12:00 AM stands for midnight.
• 12:00 PM stands for noon.