Sony DCR-TRV103 - Manual (Page 55)

Changing the MENU settings
Icon/item Mode Meaning
POWER
switch
@ HiFi SOUND • STEREO To play back a stereo tape or dual sound track
tape with main and sub sound
VTR
1 To play back dual sound track tape with main
sound
2 To play back a dual sound track tape with sub
sound
AUDIO MIX To adjust the balance between the stereo I and
stereo 2
I I
^
STl ▲ ST2
VTR
PB MODE • AUTO To automatically select the system (Hi8/
standard 8 or DigitalS) that was used to record
on the tape, and play back the tape VTR
t Him/E] To play back a tape that was recorded in the
Hi8/standard 8 system when your camcorder
does not automatically distinguish the
j-ecording system
c
LA
o
3
N
5'
® LCD B, L. • BRT NORMAL To set the brightness on the LCD screen normal VTR o
c
BRIGHT To brighten the LCD screen
CAMERA
n
LCD COLOR To adjust the color on the LCD screen, turn and
press the SEL/PUSH EXEC dial
VTR
CAMERA 3
n
O
Q.
<0
___________ 1
▲
To lighten To darken
Notes on AUDIO MIX
• You can adjust the balance only for tapes recorded in the Digitals f) system,
• When playing back a tape recorded in the 16-bit mode, you carmot adjust the balance.
Note on PB MODE
The mode will return to the factory setting when:
• you remove the battery pack or power source.
• you turn the POWER switch.
Notes on LCD B.L.
• When you select "BRIGHT", battery life is reduced by about 10 percent during
recording.
• When you use power sources other than the battery pack, "BRIGHT" is automatically
selected.
55