Sony DCR-TRV103 - Manual (Page 57)

Changing the MENU settings
Icon/item Mode Meaning
POWER
switch
^ WORLD TIME To set the clock to the local time. Turn the SEL/
PUSH EXEC dial to set a time difference. The
clock changes by the time difference you set
here. If you set the time difference to 0, the
clock returns to the originally set time.
CAMERA
BEEP • MELODY To output the melody when you stnrt/stop
recording or when an unusual c’ondition occurs
on your camcorder VTR
CAMERA
NORMAL To output the beep instead of the melody
OFF To cancel the melody and beep sound
COMMANDER • ON To activate the Remote Commander supplied
with your camcorder VTR
CAMERA
t
OFF To deactivate the Remote Comn\ander to a\'oid
remote control misoperation caused by other
VCR's remote control
DISPLAY • LCD To show the display on the LCD screen and
viewfinder VTR
CAMERA
V-OUT/LCD To show the display on the TV screen, LCD
screen and viewfinder
REC uAlP • ON To light up the camera recording lamp at the
front of your camcorder
CAMERA
OFF To turn the camera recording lamp off so that
the subject is not aware of the recording
INDICATOR • BL OFF To turn off the backlight on display window VTR
BLON T o turn on the backlight
■ CAMERA
n
at
3
In more than 5 minutes after removing the power source
The "COMMANDER" and "HiFi SOUND" items are returned to their factory settings.
The other menu items are held in memory even when the battery is removed, as long as
the lithium battery is installed.
Note
If you press DISPLAY with "DISPLAY" set to "V-OUT/LCD" in the MENU settings,
the picture from a TV or VCR will not appear on the LCD screen even when your
camcorder is connected to outputs on the TV or VCR.
Notes on INDICATOR
• When-you select "BL ON", battery life is reduced by about 10 percent during
recording.
• When you use power sources other than the battery pack, "BL ON" is automatically
selected.
57