Sony SPP-SS951 - Manual (Page 7)

1 Attach the wall bracket on the bottom ot the base unit as •llustr.oea
to use it as a stand. Align the A marks ot the \va!l bracket ivtih tho-se
2
3
of the base unit.
Connect the telephone line cord to the LINE jack and to telephor.e
outlet.
Connect the AC power adaptor to the EXT IN jack and to ar .\C
outlet.
Raise the antenna. Make sure it points toward tire ceiling
Polarity of the plug
Notes
• Use only the supplied AC power adaptor. Do not use
any other AC power adaptor.
Connect the AC power adaptor to a continuous pots er
supply.
Place the base unit close to the AC outlet so that \ ou car
unplug the AC power adaptor easily.
Tips
• If your telephone outlet is not modular, contact \ our telcrhone Modular
seryice company for assistance. —
• To remove the wall bracket, press the upper tab.
Choose the dialing mode
For the telephone to work properly, select an appropriate dialing ntexie tone or
pulse).
Depending on vour dialing systerr, se:
the DL\L MODE switch as foUot'. s:
If your dialing system is Set the s>vftdh to
Tone T
Pulse r
If you aren't sure of your dialing system
Make a trial call with the DIAL MODE switch set to T. If the call connects kesye
the switch as is; otherwise, set to P.