Sony STR-D790 - Manual (Page 24)

Editing a Video Source
Video Tape Dubbing
If the AUDIO indicator is lit in the display window, press the
EDIT AUDIO button to make the indicator go out.
With the STR-D990
Video signals
POWER
3 TV tuner/VCR 2
4
to VIDEO 2
VIDEO IN/
AUDIO IN
VCR11 4
to VIDEO 1 VIDEO
OUT/AUDIO OUT
to VIDEOS
VIDEO IN/
AUDIO IN
TV tuner/VCR3 3
Select the playback VCR with EDIT VIDEO.
To select VCR 2. press EDIT VIDEO so that
‘2>
1*
appears on the display.
To select VCR 3. press EDIT VIDEO so that '3>
V
appears on the display.
2
Press VIDEO 2/LD or VIDEOS to select the video
signal to monitor on the monitor TV according to
the VCR to be played.
VIDEO 2/LD; for the VCR 2
VIDEOS: for the VCR 3
Set the playback VCR to the playback mode.
4 Set the VCR 1 to the recording mode.
Dubbing will start.
— Video editing —
To switch the playback VCR during dubbing
Press EDIT VIDEO. Each time you press the button, the
playback VCR switches from the VCR 2 to the VCR 3 (or the
VCRS to the VCR 2).
To view the other video source(s) on the monitor TV
during dubbing
Press the appropriate function selector, VIDEO 1, VIDEO 2/
LD, or VIDEOS.
To listen to an audio program during video tape dubbing
1 Press the appropriate function selector.
2 Start the selected audio program source.
With the STR-D790
POWER -» ON]
Video signals
I VCR 11 3
2 TVtuner/VCR2
to VIDEO 2
t
VIDEO IN/
AUDIO IN
to VIDEO 1 VIDEO
OUT/AUDIO OUT
1
Press VIDEO 2/LD.
2
Set VCR 2 to the playback mode.
3
Set the VCR 1 to the recording mode.
Dubbing will start.
To listen to an audio program during video tape dubbing
1 Press the appropriate function selector.
2 Start the selected audio program source.
To record a TV program
You can record a TV program on VIDEO 1.
24