Sony STR-D790 - Manual (Page 13)

Operating with the Remote Commander
Before operating the equipments with the remote
commander, be sure to set the receiver to the desired mode
by pressing one of the FUNCTION buttons.
The FUNCTION buttons are factory set in the following list.
List of operative buttons in SYSTEiM mode (When setting
the SYSTEiM/TV seiector to SYSTEM
FUNCTION to be
pressed Operating equipment
DAT DAT
1
CD CD player |
TUNER Tuner
PHONO (The receiver enters the PHONO mode.)
VIDEO 1 Betamax VCRs
VIDEO 2 LD player |
VIDEOS 8 mm VCRs
TAPE Tape deck A
• When VIDEO 1,2 or 3 is pressed, the power of the
selected video equipment and W is turned on.
I
Operating the equipment
1 Press the desired FUNCTION.
2 Press ◄ (only for tape deck) or ► to start playback.
Changing the settings of the FUNCTION Buttons
With the SELECT button, you can replace the functions
stored in the FUNCTION buttons. ^
I
To change the settings of the FUNCTiON buttons
1 Press one of the FUNCTION buttons to be stored.
2 Press SELECT.
3 Press the 1 to 9 button to select №e desired function within
30 seconds.
4 Press ENTER.
To operate other unit temporariiy without changing the
settings of FUNCTiON
1 Press SELECT.
2 Press the 1 to 9 button to select the function.
3 Press the desired button.
After operating the unit, the receiver enters the previous
mode.
Operative buttons: POWER,
N◄/►► 1 , ■, ◄/►, ii,
•REC, D.SKIP, TV/VIDEO, ANTTVATR. CH/PRESET
+/-, SHIFT. INDEX.
'
Exampie:
To record the program source in DECK A in the CD mode
1 Press SELECT.
2 Press 3 (DECK A).
3 While pressing •, press REV or FWD.
After operating DECK A. the receiver enters the CD mode
automatically.
Operating
equipment
TUNER CD DAT DECK
A,B
TV LDP VTR1,
2.3
1 • • • — • • #
2 • • • — • • •
3 • • • — • • #
4 • • • — • • •
S • • — • •
6 • • • — • • •
7 • • • — • • •
8 • • • — • • •
9 • • • — • • •
0 •
— — — • • •
— — — — — — —
ENTER — — — — • — •
SHIR • — — — — — —
TV/VIDEO — — — — • ★ ★
ANT TV/
VTR
— — — — — — •
CH
PRESET •
— — — • — •
INDEX •
— — — — — —
D.SKIP — • — — — — —
— • • • — • •
— • • • — • •
ex — • • — — • —
— • • — — • —
REV or
■4 + «
— — — •
— — —
FWD or — — • • — —
•
II — • • • — • •
■ -4 — — — # — — —
► — • • • —
• •
■ — • • • — • •
•: The button is operative.
—; The button is not operative.
★ : The button can operate TV and VTR connected to TV.
Note
To operate the unit correctly, the function mode of the
receiver should be same with that of the remote
commander. So, be sure to press the desired FUNCTION
button at first and then the operative button.
13