Sony CPD-420GS - Manual (Page 6)

Setup
Connecting to a laptop or second computer
Before using your monitor, check that the following accessories
are included in your carton;
• Power cord (1)
• HD 15 video signal cable (1)
• Macintosh adapter (1)
• Windows Monitor Information Disk (1)
• Warranty card (1)
• Notes on cleaning the screen’s surface (1)
• This instruction manual (1)
Step 1:Connect your monitor to
your computer
Turn off the monitor and computer before connecting.
Connecting to an IBM PC/AT or compatible
computer
■ Connecting to a Macintosh or compatible
computer
Use the supplied Macintosh adapter.
Open the Front Video Input connector on the left side of the front
panel to connect a laptop or a second computer using the supplied
HD15 video signal cable. Use the suppUed Macintosh adapter to
connect a Macintosh laptop or second computer.
Step 2:Connect the power cord
With the monitor and computer switched off, first connect the
power cord to the monitor, then connect it to a power outlet.
compatible
computer
output
* Connect the supplied Macintosh adapter to the computer before
connecting the cable. This adapter is compatible with Macintosh LC,
Performa, Quadra and Power Macintosh, G3 series computers.
Macintosh II series and some older versions of PowerBook models may
need an adapter with micro switches (not supplied).