Sony STR-DE935 User Manual
Fm stereo fm-am receive
This manual is related to the following products:
Table of contents
Document Outline
- FM Stereo FM-AM Receive
- Precautions
- About This Manual
- fioDking^Upi the
- Unpacking
- Antenna Hookups
- Audio Component Hookups
- Video Component Hookups
- 5.1 CH Input Hookups
- other Hookups
- and Setting Up ¡the Speaker System
- Speaker System Hookup
- Performing Initial Setup Operations
- Multi Channel Surround Setup
- Specifying the S|M"aKir parthiiten
- 1 Press 1/(1) to turn on the receiver.
- 2 Press SET UP.
- Press the cursor buttons « or » to select the parameter you want to adjust.
- 4 Turn the jog dial to select setting you desire. The setting is entered automatically.
- Repeat steps 3 and 4 until you have set all of the parameters that follow.
- Ç About speaker distances
- ■ Distance unit (DIST. UNIT)
- Adjusting thй п^alcer volume
- Specifying the S|M"aKir parthiiten
- Before You Use Your Receiver
- Location of Parts and Basic Operations
- Q] l/(!) switch
- O Function buttons
- о
- ft
- o'
- о
- Д
- a
- ] INPUT MODE button
- g] 5.1CH INPUT button
- [U MASTER VOLUME control
- [U MUTING button
- [7] SPEAKERS selector
- PHONES jack
- ] 2ND AUDIO button
- I DISPLAY button
- B9 DIMMER button
- A.F.D. button / indicator
- MODE button / indicator
- 2CH button / indicator
- M MULTI CHANNEL DECODING indicator
- 01 BASS BOOST button
- Ш EQUAUZER button
- When you want to listen to an analog source without any digital processing
- DIRECT- button
- SHIFT button
- Numeric buttons (1 to 0)
- AM button
- FM button
- FM MODE button
- MEMORY button
- TUNING +/- buttons
- PRESET */- buttons
- O LEVEL button
- m SUR button
- m EQ button
- IS Cursor buttons «/»
- HI Jog dial
- о
- о.
- Surround
- Sound
- A.F.D.
- Brief descriptions of buttons used to enjoy surround sound
- Selecting a Sound Field
- Understanding the Multi-Channel Surround Displays
- Source sound displays
- m
- Adjusting the level parameters
- Adjusting the fSȣ
- 1 Start playing a program source encoded with multi channel surround sound.
- 2 Press EQ.
- 3 Press the cursor buttons « or »to select the parameter you want to adjust.
- 4 Turn the Jog dial to select setting you desire. The setting is entered automatically.
- V You can turn off the equalization without erasing it
- Resetting customized sound fields to the factory settings
- Adjustable parameters for each souiidAefd'nm;: i»-»? :e~; '
- о.
- Receiving
- Broadcasts
- •
- Brief descriptions of buttons used to receive broadcasts
- Direct Tuning
- 1 Press TUNER to light the button up.
- 2 Press FM or AM to select the FM or AM band.
- 3 Press DIRECT.
- 4 Press the numeric buttons to enter the frequency. Example 1: FM 102.50 MHz
- Example 2: AM 1350 kHz
- 5 If you've tuned in an AM station, adjust the direction of the AM loop antenna for optimum reception.
- 6 Repeat Steps 2 to 5 to receive another station.
- 9 If you try to enter a frequency that Is too precise for the tuning scale
- Automatic Tuning
- 1 Press TUNER to light the button up.
- 2 Press FM or AM to select the FM or AM band.
- 3 Press TUNING + or TUNING -.
- Presetting radioitatlon$ <£;
- 1 Press TUNER to light the button up.
- 2 Tune in the station that you want to preset using Direct Tuning (page 44), or Automatic Timing (this page).
- 3 Press MEMORY.
- 4 Press SHIFT to select a memory page (A, B or C).
- 5 Select a preset number by pressing it (0 to 9).
- 6 Press MEMORY again to store the station.
- 7 Repeat Steps 2 to 6 to preset another station.
- To change a preset number to another station
- Tuning to preset stations
- Brief descriptions of tnittons that appear in this chapter
- Naming Preset Stations and Program Sources
- Recording
- Using the Sleep Timer
- Adjustments Using the SET UP Button
- Aaditional
- Information