Sony STR-DE935 - Manual (Page 10)

5.1 CH Input Hookups
Although this receiver incorporates a multi channel
decoder, it is also equipped with 5.1CH INPUT jacks.
These connections allow you to enjoy multichannel
software encoded in formats other than Dolby Digital
(AC-3) and DTS. If your DVD player is equipped with
5.1CH OUTPUT jacks, you can connect them directly to
this unit to enjoy the sound of the DVD player's multi
channel decoder. Alternatively, the 5.1CH INPUT jacks
can be used to connect an external multi channel decoder.
To fully enjoy multi channel surround sound, you will
need five speakers (two front speakers, two rear speakers,
and a center speaker) and a sub woofer. Refer to the
instruction manual supplied with your DVD player, multi
channel decoder, etc., for details on the 5.1 charmel input
hookups.
Required cords
Audio cords (not supplied)
Two for the 5.1CH INPUT FRONT and REAR jacks
White (L)
Red (R)
White (L)
Red (R)
Monaural audio cords (not supplied)
Two for the 5.1CH INPUT CENTER and SUB WOOFER jacks
Black cT~Bto= 3-i1(q~l=i Black
Video cord (not supplied)
One for the DVD/LD VIDEO IN jacks (etc.)
DVD player.
Multichannel decoder, etc.
Yellow =C3nj= Yellow
Note
When using the connections described below, adjust the level of
your surround speakers and sub woofer from the DVD player or
multichannel decoder.
Example of a DVD player hookup using the 5.1 INPUT jacks
VIDEO OUT 5.1 CH INPUT
DVD/LD
r IN VIDEO etc.
□
(0)
e
SPEAKERS
FRONT
-[ I Front Speaker (L)
-( [ Front Speaker (R)
SPEAKERS
REAR/CENTER
I-----Rear Speaker (L)
-I
---- Rear Speaker (R)
SUB WOOFER
-[ ^ Center Speaker
*—[ ^ Active Woofer
Note
See page 15 for details on speaker system hookup.
11