Sony STR-DE935 - Manual (Page 27)

Front Panel Parts Description
dt
3
a
m
ft»
K
>
3
o
‘Q
] 2ND AUDIO button
Press repeatedly to select 2 channel (stereo) audio
signals for output to a stereo amplifier in another
room (page 12).
Each press selects another audio source (except
PHONO) to be output from the 2ND AUDIO OUT
jacks. "SOURCE" selects the same program source as
the main function controls.
• Even if 2ND AUDIO is set to "SOURCE", no sound is
output when the receiver is set to 5.1CH INPUT.
♦ Only signals from components connected to the analog
inputs are output through the 2ND AUDIO OUT jacks. No
signals are output from components connected to only the
digital inputs.
I
DISPLAY button
Press repeatedly to change the information on the
display window as follows:
♦
Index name of the component or the preset station*
FUNCTION button indication or frequency*’
Sound field applied to the program source
B9 DIMMER button
Press repeatedly to adjust the brightness of the display.
ITil Use the SOUND FIELD buttons to enjoy surround
sound. For details, see "Enjoying Surround Sound"
starting from page 31.
A.F.D. button / indicator
Press to set the receiver to automatically detect the
type of audio signal being input and perform proper
decoding (if necessary).
MODE button / indicator
Press to activate the sound field selection mode (page
32).
• Sound fields are not compatible with 96 kHz digital audio
signals.
2CH button / indicator
Press to output sound from only the front (left and
right) speakers.
M MULTI CHANNEL DECODING indicator
This indicator lights when the unit is decoding signals
recorded in a multi channel format.
Index name appears onl\/ when you have assigned one to the
component or preset station (see page 48). Index name does not
appear when only blank spaces have been entered, or it is the
same as the function button.
* Frequency appears only when the tuner is selected.
28