Examples, 1 set power/lock to power, 7 adjust volume – Sony ICF-SW7600G User Manual
Page 8: To improve reception, For mw/lw reception, For sw reception, For fm reception, Direct tuning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Direct Tuning
3 4 5 6
Examples
FM 89.5 MHz
AM 810 kHz
i
^
'
l
•
►
C
O
■►c®
AM 10000 kHz
AM 12095 kHz
1 Set POWER/LOCK to POWER.
2 Press ON/OFF. The radio is turned on.
3 Press FM/AM to select the band (FM or AM).
Select AM to receive SW, MW or LW.
4 Press DIRECT. The frequency in the display is erased.
5 Enter the frequency of the desired station directly by
pressing the MEMORY PRESET/DIRECT TUNE buttons 0 - 9.
You should press a button within 10 seconds after pressing the
previous button.
Minimum entry digit:
FM: 0.05 MHz (50 kHz)
AM: 1 kHz
For FM band, a decimal point is not required.
For AM band, lower triple zero digits can be omitted.
(See the examples at left.)
6 Press EXE. When the station is tuned in, the TUNE indicator
lights.
7 Adjust VOLUME.
To turn off the radio, press ON/OFF.
To Improve Reception
For MW/LW reception
Retract the telescopic antenna.
The built-in ferrite bar antenna
activates. Since this antenna is
directional, rotate the unit
horizontally to the optimum
direction.
For SW reception
Pull out the telescopic antenna
to its full length and set it
vertically.
For FM reception
Pull out the telescopic antenna
to expose its swivel base and
adjust its length, angle and
direction.
Note
After pressing a button, press the next
button within 10 seconds. If you do not,
the display will return to the previously
received station.
14
When you input a frequency outside
the frequency range
The display will return to the previously
received station. Press DIRECT and
enter the correct frequency again.
If you input a wrong frequency
Press DIRECT to cancel the entry, and
perform the above procedure from step 4
with the correct frequency.
When the sound is distorted
Normally set SENS DX/ LOCAL to DX.
However, when the sound is distorted,
set it to LOCAL.
When you are listening to the news
Set TONE to NEWS. Vocal will be heard
more clearly. When you are listening to
music, set it to MUSIC.
To Prevent Accidental
Change of the Received
Station
Press KEY PROTECT o-n. The o-n mark
appears in the display window and all
the buttons on the control panel do not
work.
To release the key protect functigny press
KEY PROTECT o-n again.
15