Sony CCD-TRV53 User Manual
Page 58
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Maintenance information and precautions
- CCD-TRV32ATRV52ATRV312/TRV512 only
(
1
)
Remove the screw with a screwdriver (not supplied). Then, while sliding the
RELEASE knob, turn the eyecup in the direction of the arrow and pull it out.
(
2
)
Clean the surface with a commercially available blower.
To reattach the eyecup
(1)
Align the groove on the eyecup with the • mark on the barrel.
(
2
)
Turn the eyecup in the direction of the arrow.
(3)
Replace the screw.
f 1
s
2
V
1
If
1
J
Caution
Do not remove any other screws. You may remove only the screw to remove the
eyecup.
58
This manual is related to the following products: