Sbnra osm tut, Commander Page 28: Lcd b.l. *
Page 28: Lcd b.l. *
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Changing the mode settings
[ sbnra
osM tut/
Items for both CAMERA and PLAYER modes
COMMANDER
• Select ON when using the supplied Remote Commander for the camcorder.
• Select OFF when not using the Remote Commander.
BEEP*
• Select ON so that beeps sound when you start/stop recording, etc.
• Select OFF when you do not want to hear the beep sound.
LCD B.L. *
• If you select BRT NORMAL, the battery life becomes about 10% longer than it is
when you select BRIGHT.
• Select BRIGHT to make the LCD screen brighter when shooting/playing back
outdoors.
Items for CAMERA mode only
REC MODE*
• Select SP to record a tape in SP (standard play) mode.
• Select LP to record a tape in LP (long play) mode.
TITLE
pos*
<
center
;
bottom
>
• Select CENTER to center the title in the picture.
• Select BOTTOM to position the title at the bottom of the picture.
TITLE LANG*
Select the language of the preset titles.
TITLE1 SET*/TITLE2 SET*
Store your own titles.
D ZOOM*
• Select ON to activate digital zooming.
• Select OFF to not use the digital zoom. The camcorder goes back to 15x zoom.
REC LAMP*
• Select OFF when you do not want the camera recording/battery lamp at the front of
the unit to light up.
• Normally select ON.
AUTO DATE*
• Select ON to record the date for 10 seconds after recording has started.
• Select OFF to not record the date.
CLOCK SET*
Reset the date or time.
DEMO MODE*
• Select ON to make the demonstration appear.
• Select OFF to make the demonstration not appear.
28