Editing onto another tape – Sony CCD-TRV53 User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Editing onto another tape
You can create your own video program by editing with any other S 8 nun, HiB Hi8,
m VHS, sm S-VHS, mss VHSC, SIVUSB S-VHSC, rs Betamax or BBSitel ED Betamax
VCR that has video/audio inputs.
Turn down the volume of the camcorder while editing. Otherwise, picture distortion
may occur.
After connecting the camcorder to the VCR,
(1) Set the POWER switch to PLAYER.
(
2
)
Insert a blank tape (or a tape you want to record over) into the VCR and
insert your recorded tape into the camcorder.
(3)
Play back the recorded tape on the camcorder until you locate the point
where you want to start editing, then press II to put the camcorder in
playback pause mode.
(4)
On the VCR, locate the recording start point and put the VCR in recording
pause mode.
(5)
Press II on the camcorder and VCR simultaneously to start editing.
>
a
: Signal flow
To edit more scenes
Repeat steps 3 to 5.
To stop editing
Press □ on both the camcorder and VCR.
47