Sony RM-V60 - Manual (Page 5)

Operating a Receiver Operating a Tape
Q] Press tlu' button on which
the dosirod component is
assigned betöre operating.
in To turn on and off.
n To select the input source;
1 selects VIDEO 1
2 selects VIDEO 2
3 selects VIDEO 3
4 selects TUNER
" 5 selects CD PLAYER
6 selects TAPE DECK
8 selects TV
9 selects CABLE BOX
(7 and 0 do not have an
assigned funciton).
ÏÂ] Volume up: +
Volume down; -
[§ To mute the volume on a
receiver.
n Presetting frequency up: +,
down; - ,
Tuning frequency up: +,
down; -
[7] To shift band (FM/AM).
iSl To set up the Commander.
E Press the button on which
the desired component is
assigned before operating.
Each time you press TAPE,
TAPE A or TAPE B appears
by turn.
n To select the tape deck:
1 selects Deck A (dual
cassette deck only*)
2 selects Deck B (dual
cassette deck only*)
0 functions as ◄reverse
button, or swiches play
sides.
[3] To record, press ► while
pressing # /First release ►,
then release #.
3] To pause.
^ To rewind.
£ To play.
7^ To fast-forward.
^ To stop.
9] To select the tape deck; Deck
A or Deck B (dual cassette
deck only**)
SS To set up the Commander.
* If your tape deck's commander
has two sets of tape operating
buttons and has no A/B button
for deck selection, use the
numeric buttons (1 and 2):
button 1 selects Deck A, and
button 2 selects Deck B.
**If your tape deck's commander
has one set of tape operating
buttons, and has an A/B button
for the deck selection, use the
RECALL button to select Deck A
or Deck B.
Operating a CD player, an MD deck or a DAT deck Operating a LD player
m
a
Press the button on which
the desired component is
assigned before operating.
To turn on and off.
To select the track number.
0 selects track 10.
To select track numbers
above 10, see the
descriptions on the DISP
button below.
To select numbers 10 and
above.
For example, to select track
15, press DISP and then
press 5.
To record, press ► while
pressing #/First release ►,
then release •. (for MD deck
only)
To pause.
To select the previous track.
To play.
To select next track.
To stop.
Next track: +
Previous track: -
To select next disc.
To set up the Commander.
m Press the button on which
the desired component is
assigned before operating.
121 To turn on and off.
[3] To select the track number. 0
selects track 10.
To select track numbers
above 10, see the
descriptions on the DISP
button below.
3] To select numbers above 10
and above.
For example, to select track
15, press DISP and then
press 5.
^ To pause.
6 To seek the previous picture.
7_ To play.
^ To seek the next picture.
9. To stop.
¡3 Chapter up : +
Chapter down: -
ITi] To set up the Commander.