Sony RM-V60 - Manual (Page 4)

Remote Button Descriptions
Operating a Cable box
Operating a TV
m
S3
m
BÎ
Preiis before operating a TV.
To turn on and off.
To change the input mode.
To change the channel. For
example, to change to
channel 5, press 0 and 5 (or,
press 5 and ENTER).
To display the current
channel on TV.
To enter the selection.
To move the cursor upward,
downward, to the right, or
to the left.
Volume up: +
Volume down: -
To mute the volume on the
TV.
To operate SLEEP function
on the TV. (Works only for a
TV with the SLEEP
function.)
To call up the MENU
display.
Channel up: +
Channel down: -
To operate JUMP,
FLASHBACK or CHANNEL
RETURN function on the TV
depending on the setting of
the TV's manufacturer.
To set up the Commander.
[T] Press the buttvm on which
the desired component is
assigned before operating.
To turn on and off.
[3] To change the channel. For
example, to change to
channel 5, press 0 and 5 (or,
press 5 and ENTER).
[4| Channel up: +
Channel down: -
O To operate JUMP,
FLASHBACK or CHANNEL
RETURN function on the
Cable box depending on the
setting of the manufacturer.
To set up the Commander.
Notes
• There may be causes you may
turn on/off the cable box by
pressing the CH+ or CH-
buttons on the Commander.
• If your cable box can corntrol
volume, be sure to set its volume
control to a medium position. If
the volume on the cable box is
turned down completely, you
will not be able to adjust your -
TV's volume with the
Commander.
Operating a VCR Operating a DBS tuner
m Press the button on which
. the desired component is
_assigned before operating.
To turn on and off.
To switch the signals
supplied to the TV (from
antenna or VCR).
[4 \To change the channel.
For example, to change to
channel 5, press 0 and 5 (or,
press 5 and ENTER).
fSl To display the pn-screen
menu (Sony VCR only).
To record, press ► while
pressing #.
To pause.
To rewind.
To play.
To fast-forward.
To stop.
Channel up: +
Channel down: -
To set up the Commander.
m Press the button on which
the desired component is
assigned before operating.
To turn on and off.
To switch the output of the
DBS receiver to the TV.
(When you connect a TV
cable or antenna to the DBS
receiver, the output swiches
between a TV and DBS
program.)
Ï4] To change the channel.
For example, to change to
channel 5, press 0 and 5 (or,
press 5 and ENTER).
To turn on the display.
To bring up the Master
Guide.
[T1 T o scroll through the Master
Guide.
To use favorite function.
To call up the MENU
display.
m To bring up the Station - ^
Index when a program
guide is not displayed.
To select the channel that's
highlighted.
ITÎ1 Channel up: +
Channel down: -
To page through the guide
when a program guide is
displayed.
[Ï3 To tune to the last tuned
station.
[Î3 To set up the Commander.