Sony SLV-M20HF User Manual

Page 37

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

To ensure correct operation

• Place the Cable Mouse so that it hangs out over the cable box/DSS

receiver front.

• Do not place the cable box/DSS receiver on top of the VCR.

• Position the cable bax/DSS receiver away from the VCR.

• Point the remote commander at the VCR, not at the cable box/DSS

receiver.

: Signal flow

To check the cable box control setting

Press CH +/ - on the remote commander. Does the channel indicator
on the cable box/DSS receiver change? (Point the remote commander
at the VCR, not at the cable box/DSS receiver.)

Press all 10 number buttons (0 to 9) on the remote commander. Does
the channel indicator on the cable box/DSS receiver change?

If the answer to both 1 and 2 is "'yes,J' you have made the correct setting.

continued