beautypg.com

Sony SLV-M20HF User Manual

Page 31

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

To activate the Auto Clock Set function, turn off the VCR.

The VCR automatically sets the clock by searching for a channel that

carries a time signal and sets your time zone and Daylight Saving
Time (if applicable).

* •

Notes

• The clock cannot be set automatically if you don't receive a channel that carries a

time signal in your area. If so, set the clock manually.

• If there are only a few channels in your area that carry time signals, setting the clock

automatically may take up to about 30 minutes.

• If you use Hookup 1 or 4, make sure you leave the cable bo^ on.

continued