Automatic clock setting, Step 3: hookups (continued) – Sony SLV-M20HF User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 3: Hookups (continued)
Normal display
4
Preset the cable box output channel (usually 2, 3, or 4). For details, see
page 41.
O
Press MENU and select TUNER PRESET.
O Enter the cable box output channel. Set
MANUAL SET to ADD and press the cursor
stick (OK).
TIMER SET / CHECK
TUNER PRESET
CLOCK SET
LANGUAGE
CABLE BOX CONTROL
ADVANCED OPTIONS
SMARTFILE EDIT
Use |4'
I
to select a
i tem, then push |0K|
ANTENNA
/
CABLE|A^
ICABLEI
AUTO PRESET
MANUAL SET
ADD
ERASE
AFT
ON
OFF
FINE TUNING
Sel ec t CH with |o^ . Push
|ENTER|.R^ to ADD/ERASE
Automatic clock setting
Once you've set up the VCR, it automatically sets the clock the first time you
turn off the VCR. After that, whenever you turn off the VCR, it checks the
time and adjusts the clock, even for Daylight Saving Time. The VCR sets the
clock by picking up a time signal provided by some TV channels.
If you want to use the timer to record right away, or if the channels in your
area do not carry time signals, set the clock manually. For details, see page
32.
Note
• To use the Auto Clock Set feature, set the A / B switch to A.