Installing and charging the liatt«y |mk1c, Notes, Installing and charging the liatt«y – Sony CCD-TR87 User Manual
Page 8: Charging the battery pack
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing and charging the liatt«y |
mk
1
c
Charging the battery pack
Ch.irge the biitterv piick on n flat surlace \\ ithout \ ibration. The battery paek is charged
a little in the factorv.
(1)
Open the DC IN jack cover and connect the supplied AC power adaptor to the
DC hN jack with the plug's A mark up,
(
2
)
Connect the power cord to the AC power adaptor.
(3)
Connect the power cord to a wall outlet.
(4)
Slide the POWER switch to OFF. Remaining battery time is indicated by the
minutes on the display window. Charging begins.
When the remaining battery indicator becomes •(■I, normal charge is completed. For
full charge, which allows vou to u.se the battery longer than usual, leave the battery
pack attached for about 1 hour after normal charge is completed until FULL appears in
the displav window. Unplug the AC power adaptor from the camcorder. You can also
use the battery pack before it is completelv charged.
Before using the camcorder with the battery pack, unplug the AC power adaptor from
the DC IN jack of the camcorder.
7----
POWER
■ (CAMERA
■ OFF
• ggEM
>
/
n n
1 U U m i n
♦
f
C u m i n
FULL
Notes
• "— min" appears on the display until the camcorder calculates remaining battery
time.
• Remaining battery time indication in the display window roughly indicates the
recording time. Use it as a guide. It may differ from the actual recording time.