Sony CDP-361 - Manual (Page 7)

I
Playing CDs
Checking the remaining time
Each time you press TIME while playing a disc, the
display changes as shown in the chart below.
Playing time and
number of the
current track
Remaining time on
the current track
Press
► I
/
WN SEC \
-
;.
5 71
2
6 10
If the track number exceeds 68,
"— . —" appears instead of the
remaining time.
Press
Remaining time on
the disc
_ _ , 1 2 3 4 5
-H 3. 31? I ZZZi-t?
If the remaining time exceeds 100
minutes in program mode,
appears instead of the
remaining time.
Press n —
To locate Press
The next or
succeeding tracks ►►I>C>il (►►!) repeatedly until you
find the track
The current or
preceding tracks (1^^) repeatedly until you
find the track
A specific track
directly Number button of the track
By scanning each
track for 10 seconds
(music scan) MUSIC SCAN before you start
playing. When you find the track you
want, press O to start playing.
A point while
monitoring the sound ►►[>l>il (►►) (forward) or D
(•<^) (backward) and hold down until
you find the point
A point quickly by
observing the display
during pause lKKI^^/^^I>C>il {◄◄/►►) and hold
down until you find the point. You
will not hear the sound during the
operation.
'P' When you directly locate a track numbered over 10
Press >10 first, then the corresponding number buttons.
To enter "0," use button 10.
Example: To play track number 30
Press >10 first, then 3 and 10.
'Q' You can extend the playing time during music scan
Press MUSIC SCAN repeatedly until the playing time
you want (10,20 or 30) appears in the display. Each time
you press the button, the playing time changes cyclically.
Locating a Specific Track or a
Particular Point in a Track
You can quickly locate any track while playing a disc
using the ll«-4^/^>-I>t>il (AMS: Automatic Music
Sensor) buttons or number buttons.
You can also locate a particular point in a track while
playing a disc.
MUSIC SCAN Number buttons >10
Note
If " ~l ~l " appears in the display, the disc has reached the end
while you were pressing ►►OfcHi (►►). Press D<3or ◄◄) to go back.
Number
buttons
>10
-
CDCDa
O O O
O O O
(CDP-361 only)