Note, Connecting the ac power cord, Using the display – Sony CDP-361 User Manual
Page 6: Display information while playing a disc, Playing cds, Getting started, Where do i go next
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Getting Started
Fdf CDP-261
CD player
Amplifier
LINE
o u t
’’
INPUT ’
CD
1
(
-©L
R©H
K 'I
h © R j
'Q' You can adjust the output level to the amplifier
(CDP-361 only) [XI
Press LINE OUT LEVEL on the remote. You can reduce
the output level up to -20 dB.
When you reduce the output level,
appears in the
display.
When you turn off the player, the output level
automatically returns to the maximum level.
If you have a digital component such as a digital
amplifier, D/A converter, DAT or MD (CDP-361 only)
Connect the component via the DIGITAL OUT (OPTICAL)
connector using the optical cable (not supplied). Take off
the cap and plug in the optical cable.
Note that you cannot use fading in or out (page 10) and
time fade (page 11) functions when making this connection.
<0=3—
POC-15
■d b-
CD player
Optical cable (not supplied)
Digital component
Note
When you connect via the DIGITAL OUT (OPTICAL)
connector, noise may occur when you play CD software other
than music, such as a CD-ROM.
Connecting the AC power cord
Connect the AC power cord to a wall outlet.
Where do I go next?
Now you're ready to use your player.
If you aren't familiar with how to play CDs, go to the section
"Playing a CD" on page 4.
Then, go to the follozving sections for other operations.
I
Playing CDs
Using the Display
You can check information about the disc using the
display.
TIME
Checking the total number and playing
time of the tracks
Press TIME before you start playing.
The display shows the total number of tracks, total
playing time and music calendar.
/ n
lU.
. w 5 . e e .
Total number of
tracks
2
3
4
5
6
7
8
9
10
Music calendar
Total playing time
While in shuffle play mode ("SHUFFLE" appears in
the display; see page 8), a one-second access time blank
is added between each track. This increase is
automatically added to the total playing time in the
display.
The information also appears when you press
= OPEN/CLOSE to close the disc tray.
Display information while playing a disc
While playing a disc, the display shows the current
track number, playing time and the music calendar.
I.
5
6
.
Current track
number
2
3
4
5
8
7
8
9
10
Music calendar
Playing time
The track numbers in the music calendar disappear
after they are played.