Sony TA-AV571 - Manual (Page 11)

Getting the Most Out of Dolby
Pro Logic Surround Sound
To obtain the best possible Dolby Pro Logic Surround
sound, first select the center mode. Then, adjust the
volume of each speaker.
Nofe fhat you must connect the rear speakers and / or a
center speaker to do the following adjusfments.
CENTER
MODE DOLBY CENTER REAR
SURROUND-
T.TONE
SURROUND-
DELAY
LEVEL
CONTROL
CENTER ■
LEVEL
CONTROL'
REAR
mcpcbcpo
Q (23 Q iSHS)
a a GD
P5T
a
1
?
(23
(
2
)
SURROUND
MODE
SURROUND
ON/OFF
Using Sound Fields
Selecting the center mode
The amplifier offers you four center modes:
NORMAL, WIDE, 3 CH, and PHANTOM. Each mode
is designed for a different speaker configuration.
Select the mode that best suits your speaker's system
configuration.
1 Press DOLBY to turn on the Dolby Pro Logic
mode.
2 Press CENTER MODE repeatedly until the center
mode you want appears in the display. Select the
center mode by referring to the following chart.
If you have Select So that
Front and rear
speakers, and a
sm all center
speaker
NORMAL The bass sound of the
center channel is
output from the front
speakers(because a
sm all speaker cannot
produce enough
bass).
Front and rear
speakers, and a
large center
speaker
W IDE For wide range
Dolby Pro Logic
Surround sound to
all speakers.
Front and
center speakers,
no rear speaker
3CH
(3 Channel
Logic)
The sound of the rear
channel is output
from the front
speakers.
Front and rear
speakers, no
center speaker
PHANTOM The sound of the
center channel is
output from the front
speakers.
'Q' When you use the remote [J]
Press SURROUND M ODE repeatedly to select DOLBY.
You can adjust the speaker's volume or delay tim e
sim ply by pressing the buttons on the rem ote.
(continued)
11