Sony SPP-AQ500 - Manual (Page 37)

Troubleshooting
If you’ve experienced any of the following difficulties while using
your phone, use this troubleshooting to help you remedy the problem.
Should any problem persist, consult your nearest Sony dealer.
Symptom Remedy
You hear five short error
beeps when you press
C talk ).
• Make sure you set up the base unit correctly (page
9).
• Move the handset closer to the base unit.
• Replace the handset to the base unit for a while to
recharge the battery pack.
You hear no dial lone. • Make sure the telephone line cord is securely
connected to the telephone outlet.
• Make sure the battery is fully charged (page 12).
JO
"fO
u
Ui
c
The telephone always
connects with the wrong
number or doesn't connect
at all. even though the
number you dial is correct.
• Make sure the dialing mode is set correctly (page
10).
<0
The phone doesn't redial
correctly.
• Make sure the number you last dialed (including the
tone and pause digits, if used) is fewer than 32
digits.
• Make sure the last dialed number is really the one
you want to dial.
You hear interference
during conversation.
• Move the handset closer to the base unit.
• Press ( CHANNEL
)
for a channel that stives better
reception.
• Place the base unit away from noise sources (page
8).
You hear a beep e\ ery three
seconds.
• The battery is weak. Charge the battery for more
than 12 hours (page 12).
>
a
a
o
3
SL
3
o
3
SJ
r*
o'
3
continued
Additional Information